Navigating Induction Cooktop Error Codes: A Comprehensive Guide - Gaslandchef

Navigating Induction Cooktop Error Codes: A Comprehensive Guide

Induction cooktops have become the go-to choice for many home chefs due to their speed, precision, and energy efficiency. However, like any advanced appliance, induction cooktops may occasionally throw error codes, leaving users puzzled. In this comprehensive guide, we'll explore common induction cooktop error codes and provide step-by-step solutions to help you troubleshoot and get back to enjoying your cooking experience.

Problem

What to do

Possible causes

F3/F4

Temperature sensor of the induction coil failure

Please contact the supplier.

F9/FA

Temperature sensor of the IGBT failure.

Please contact the supplier.

E1/E2

Abnormal supply voltage

Please inspect whether the power supply is normal.

Power on after the power supply is normal.

E3

High temperature of the induction coil temperature sensor

Please contact the supplier.

E5

High temperature of the IGBT temperature sensor

Please restart after the cooktop cools down.

Problem: F3/F4 - Temperature sensor of the induction coil failure.

    What to do: Please contact the supplier.

    Possible causes: The F3/F4 error code indicates a failure in the temperature sensor of the induction coil. This sensor is crucial for regulating the temperature during cooking. Contact the supplier immediately to report the issue and seek professional assistance. Attempting to resolve this issue without proper knowledge may lead to further damage.

    Problem: F9/FA - Temperature sensor of the IGBT failure.

    What to do: Please contact the supplier.

    Possible causes: The F9/FA error code signals a failure in the temperature sensor of the IGBT (Insulated Gate Bipolar Transistor), an integral part of the induction cooktop's electronics. It's essential to get in touch with the supplier promptly. Attempting to address this issue without professional guidance may risk damaging the electronic components of the cooktop.

    Problem: E1/E2 - Abnormal supply voltage.

    What to do: Please inspect whether the power supply is normal. Power on after the power supply is normal.

    Possible causes: The E1/E2 error code suggests abnormal supply voltage to the induction cooktop. First, inspect the power supply for any issues, such as voltage fluctuations or irregularities. If the power supply is abnormal, rectify the issue before attempting to power on the cooktop again. If the problem persists, consult an electrician to address power supply issues.

    Problem: E3 - High temperature of the induction coil temperature sensor.

    What to do: Please contact the supplier.

    Possible causes: The E3 error code indicates a high temperature detected by the induction coil temperature sensor. Contact the supplier immediately to report the issue and seek professional assistance. Avoid using the cooktop until the problem is resolved to prevent further damage.

    Problem: E5 - High temperature of the IGBT temperature sensor.

    What to do: Please restart after the cooktop cools down.

    Possible causes: The E5 error code signifies a high temperature detected by the IGBT temperature sensor. Allow the cooktop to cool down before attempting to restart it. If the issue persists, it may indicate a problem with the cooling system or other components. If the problem continues, contact the supplier for further guidance and assistance.

    In all cases, it's crucial to prioritize safety and avoid attempting to repair or troubleshoot complex issues without professional knowledge. Contacting the supplier or a certified technician ensures that the problem is addressed correctly and minimizes the risk of further damage to the induction cooktop.

    📧CONTACT US: SERVICE@GASLANDCHEF.COM

    🛒Shop GASLAND Chef at: https://gaslandchef.com/

    Leave a comment

    All comments are moderated before being published.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.